`do`notation. However, category theorists predict that there is also a completely symmetric concept called a "comonad", which tickles our fancy. After all, if monads are so intriguing, then perhaps comonads are equally intriguing, and who doesn't like twice the intrigue?

However, there's nothing intriguing about comonads. In fact, comonads are so pervasive in modern programming that they need no introduction. I hope to show that you very likely already employ a comonadic programming style, although you probably prefer to call it "object-oriented programming".

In this post I will build the metaphor of comonads as objects and also introduce syntactic sugar for comonads that strongly motivates this object-oriented interpretation.

#### The Builder Pattern

Let's try to reimplement the objected-oriented builder design pattern in Haskell. For example, let's say that we have a

`Config`value we want to build that just stores a list of program

`Option`s:

type Option = String data Config = MakeConfig [Option] deriving (Show)We want to encapsulate the

`Config`and prevent the user from disassembling it, so we don't export the

`MakeConfig`constructor to prevent the user from pattern matching on the constructor. Instead, we export a function in place of the constructor so that the user can still create values of type

`Config`:

configBuilder :: [Option] -> Config configBuilder options = MakeConfig options -- or: configBuilder = MakeConfigWe could also preset certain options ahead of time for the user:

defaultConfig :: [Option] -> Config defaultConfig options = MakeConfig (["-Wall"] ++ options)These functions both have the same type: they take a list of

`Option`s and return a

`Config`so let's call any function that has this type a "builder":

someBuilder :: [Option] -> ConfigThese builders work fine if the user can supply all the options up front, because then we can set the options in one shot:

profile :: ([Option] -> Config) -> Config profile builder = builder ["-prof", "-auto-all"]

>>> profile defaultConfig MakeConfig ["-Wall","-prof","-auto-all"]However, our

`profile`option setter uses up our builder and we cannot supply any further options. For example, I might have another set of options to supply:

goFaster :: ([Option] -> Config) -> Config goFaster builder = builder ["-O2"]... but I wouldn't be able to use both

`profile`and

`goFaster`on the same builder.

In object oriented programming you don't have this problem, because you usually structure your builder to append options instead of setting them so that you can feed in additional options later. Then you extract the final configuration when you are done:

builder = new DefaultConfig(); // Begin from default config file builder.profile(); // Add profiling builder.goFaster(); // Add optimization config = builder.extract(); // Extract final config fileHowever, Haskell has no implicit state, so we cannot mutate the original builder like the objected oriented version does. Even if we could, it's not clear where we would store additional options since our builder is a function, not a record with fields.

Instead, we must cheat and modify our original functions to return a new builder that "precompiles in" the given options:

profile' :: ([Option] -> Config) -> ([Option] -> Config) profile' builder = \options -> builder (["-prof", "-auto-all"] ++ options) goFaster' :: ([Option] -> Config) -> ([Option] -> Config) goFaster' builder = \options -> builder (["-O2"] ++ options)We transformed our option setters into option appenders that leave our builder open just like the object-oriented version. Additionally, we need some sort of

`extract`function that completes the process and returns the final configuration. That's easy since we can flush the builder by supplying it with an empty option list:

extract :: ([Option] -> Config) -> Config extract builder = builder []Finally, we would like to emulate the post-fix function application of objected oriented programming, so we define the following infix operator that simulates calling a method on an object:

-- (&) is another popular name for this operator (#) :: a -> (a -> b) -> b x # f = f x infixl 0 #Using our option appenders and

`extract`, we can make a mockery of objected oriented style:

>>> let builder1 = defaultConfig # profile' >>> let builder2 = builder1 # goFaster' >>> builder2 # extract MakeConfig ["-Wall","-prof","-auto-all","-O2"]However, going back and upgrading all possible option setters into option appenders is a painstaking and laborious process, especially if we already defined a lot of them. Haskell is a functional language, though, so could we just write a function to automate this upgrade process?

In other words, we already wrote some option setter that closes the builder when done:

setter :: ([Option] -> Config) -> Config... but we want to

`extend`that setter to behave like an appender that keeps the builder open:

extend setter :: ([Option] -> Config) -> ([Option] -> Config)This means that our

`extend`function must have the following overall type:

extend :: (([Option] -> Config) -> Config ) -> ([Option] -> Config) -> ([Option] -> Config)You might expect that this isn't possible. After all, option setters seem to irreversibly use up the builder. However, we can actually cheat by intercepting the

`setter`before applying it to the

`builder`to reserve space for future options:

extend setter builder = \opts2 -> setter (\opts1 -> builder (opts1 ++ opts2))For example, if

`setter`were our

`goFaster`function, then

`extend`would transform it into

`goFaster'`:

extend goFaster builder = \opts2 -> goFaster (\opts1 -> builder (opts1 ++ opts2)) = \opts2 -> builder (["-O2"] ++ opts2) = goFaster' builder -- or: extend goFaster = goFaster'Neat!

However, all we've proven is that

`extend`works for our

`goFaster`function. How could we prove that it always works in every possible case? We might try to write some tests, perhaps by defining some example option setters, upgrading them to appenders, and simulating a few build processes, but these tests would only prove that

`extend`works in those few cases that we tested. Could we instead prove that

`extend`does the right thing in every conceivable scenario? Is that even possible?

Fortunately, Haskell's enforced purity unlocks a more powerful and more general alternative to testing: equational reasoning. We simply define the expected behavior of our

`extend`function in terms of equations and prove that

`extend`satisfies those equations. But what might that expected behavior be?

Well, we expect that if we

`extend`a

`setter`to become an appender, apply it to a

`builder`, and then immediately

`extract`the result, it should behave as if we had directly used the

`setter`. The equation for that would be:

extract (extend setter builder) = setter builderIn other words, there's no point in

`extend`ing a

`setter`if we plan to

`extract`the result immediately afterwards.

We can prove our equation because:

extract (extend setter builder) -- Use definition of extend = extract (\opts2 -> setter (\opts1 -> builder (opts1 ++ opts2))) -- Use definition of extract = (\opts2 -> setter (\opts1 -> builder (opts1 ++ opts2))) [] -- Apply the function = setter (\opts1 -> builder (opts1 ++ [])) -- (opts1 ++ []) = opts1 = setter (\opts1 -> builder opts1) -- (\opts1 -> builder opts1) = builder = setter builderPerfect!

We might also expect that if we

`extend`the empty option setter (i.e.

`extract`), the resulting appender should not change the builder since

`extract`doesn't supply any options:

**Exercise**: Prove that:

extend extract builder = builderThere's one last property that's really subtle, but important. If we choose not to

`extend`the second of two setters, we can always go back and

`extend`the second setter later as long as we haven't applied them to the

`builder`yet:

**Challenge exercise:**Prove that:

s1, s2 :: ([Option] -> Config) -> Config -- setters b , b' :: [Option] -> Config -- builders extend (\b' -> s2 (extend s1 b')) b = extend s2 (extend s1 b)Interestingly, these three equations suffice to completely describe what it means to convert an option setter into an appender. We can formulate any other property in terms of those three properties. This means that we no longer need to test our function at all because we've proven it correct in all possible circumstances.

For example, we might suppose that if we choose not to

`extend`the

**third**of three setters, we can always go back and

`extend`the third setter later on as long as we haven't applied them to the builder yet:

extend (\b' -> s3 (extend s2 (extend s1 b')) b = extend s3 (extend s2 (extend s1 b))We can derive that property from the proof of the two-setter case:

extend (\b' -> s3 (extend s2 (extend s1 b')) b -- Apply proof in reverse to the two inner stages = extend (\b' -> s3 (extend (\b'' -> s2 (extend s1 b'')) b') b -- Apply proof to the two outer stages = extend s3 (extend (\b'' -> s2 (extend s1 b'')) b) -- Apply proof to the two inner stages = extend s3 (extend s2 (extend s1 b))In fact, the proof for the two-setter case generalizes to any number of stages. In other words, if we choose not to

`extend`the last setter in an arbitrarily long chain, we can always go back and

`extend`the last setter later if we haven't applied them to the builder yet.

You might be surprised to learn that we've inadvertently defined our first comonad in our pursuit of simulating object oriented programming, but it might not be clear what exactly a comonad is or why those three equations are the only equations we need to prove.

#### The Iterator Pattern

Now let's imagine that we're writing a new terminal shell, complete with command line history. We could model history as an infinite iterator that stores events in reverse chronological order:

data Iterator a = a :< (Iterator a) infixr 5 :<The history would start off empty, which we model as an infinite stream of empty commands:

initialHistory :: Iterator String initialHistory = "" :< initialHistory... however as the user types in more commands, we expect the history to grow:

exampleHistory :: Iterator String exampleHistory = "^D" :< "^C" :< "eat flaming death" :< "hello?" :< "bye" :< "exit" :< "quit" :< "?" :< "help" :< "ed" :< initialHistoryWe want a structured way to browse history, so we decide to use the object-oriented iterator pattern. We first must define a function which

`extract`s the command below the current cursor:

extract :: Iterator a -> a extract (cmd :< _) = cmd

>>> extract exampleHistory "^D"Now we need a command to get the

`next`element in the iterator (which is the previous user command, since we're storing commands in reverse chronological order):

next :: Iterator a -> a next (_ :< (cmd :< _)) = cmd

>>> next exampleHistory "^C"But what if we want to advance another step? We can't just write:

>>> next (next exampleHistory) -- Type error!Our

`next`command uses up our

`Iterator`, so we cannot proceed to the next step.

Fortunately, we are not stupid. We can define a command which shifts the iterator by one step without returning a value:

next' :: Iterator a -> Iterator a next' (_ :< iterator) = iteratorNow we can get the value two spaces after the cursor by combining a shift and a retrieval:

next2 :: Iterator a -> a next2 iterator = next (next' iterator)... which should also be equivalent to shifting twice and extracting the value below the cursor:

next2 iterator = extract (next' (next' iterator))The latter form starts to resemble an object-oriented approach. Let's humor ourselves and pretend we are object-oriented programmers for a moment:

>>> let history1 = exampleHistory # next' >>> let history2 = history1 # next' >>> history2 # extract "eat flaming death"Hmmm. This would greatly resemble object-oriented style if we didn't have to pass around intermediate states manually...

What if we define a new retrieval that looks ahead three values?

next3 :: Iterator a -> a next3 iterator = next (next' (next' iterator)))Then we'd have to duplicate our function and make a minor change to convert it into a shift:

next3' :: Iterator a -> Iterator a next3' iterator = next' (next' (next' iterator)))Duplication with minor changes is a code smell. I would like these two functions to remain consistent such that

`next3'`always shifts to the value that

`next3`points to, but when I duplicate the code I must manually enforce that consistency between them. The "Don't Repeat Yourself" principle says you should not duplicate code precisely to avoid this problem.

Moreover, even the initial duplication could introduce mistakes, such as accidentally deleting one step while modifying the code:

next3' :: Iterator a -> Iterator a next3' iterator = next' (next' iterator)) -- Oops! I deleted the next and my boss -- distracted me in the middle of the process -- so I forgot to replace it with next'We'd prefer to automate the conversion process both to avoid introducing errors and to enforce consistency between the two functions. In other words, I need a function that takes some sort of

`retrieval`:

retrieval :: Iterator a -> a... and

`extend`s the retrieval to become the equivalent shift:

extend retrieval :: Iterator a -> Iterator a... which means that our

`extend`function has type:

extend :: (Iterator a -> a) -> Iterator a -> Iterator a

**Exercise:**Write the

`extend`function.

**Solution:**

extend f (a :< as) = (f (a :< as)) :< (extend f as) -- or using Haskell "as-patterns" extend f iter@(_ :< as) = (f iter) :< (extend f as)It's not as straightforward to prove that

`extend next`is equivalent to

`next'`. We must settle for proving that they produce the same stream of values:

extend next (_ :< as0@(a1 :< _)) = next (_ :< as0@(a1 :< _)) :< extend next as1 = a1 :< (extend next as0) -- Now do the same for next' next' (_ :< as0@(a1 :< _)) = as0 = a1 :< (next' as0) -- Both functions are of the form: f (_ :< as0@(a1 :< _) = a1 :< f as0 -- where f is (extend next) or (next') -- Therefore we tentatively conclude they are the same stream extend next iterator = next' iterator -- or just: extend next = next'Boy, that's a lot of effort to prove that

`extend`upgrades one retrieval correctly. I'd prefer to pick my proofs wisely so that I can prove that

`extend`upgrades

**all**retrievals correctly. But what proofs suffice to nail down what it means to convert a retrieval into a shift?

Well, I expect that if I upgrade a

`retrieval`into a shift, apply the shift, then

`extract`the value under the cursor, I should get the same value as if I had just used the retrieval directly:

**Exercise:**Prove that:

extract (extend retrieval iterator) = retrieval iteratorThis proof is simple and requires no fancy tricks.

Since

`extract`points to the current location, I expect the equivalent shift to not move the iterator at all:

extend extract iterator = iteratorI'll do this one:

extend extract (a :< as) = (extract (a :< as)) :< (extend extract as) = a :< (extend extract as) -- Haskell's 'id' function produces the same stream: id a = a id (a :< as) = a :< (id as) -- Both functions are of the form: f (a :< as) = a :< (f as) -- where f is (extend extract) or (id) -- Therefore we tentatively conclude they are the same stream: extend extract iterator = id iterator = iterator -- or just: extend extract = idAgain, there's one last non-trivial property. If I choose not to

`extend`the second of two retrievals, I can still

`extend`the second retrieval later if I haven't applied both of them to an iterator yet:

**Challenge Exercise:**Prove that:

r1, r2 :: Iterator a -> a -- retrievals i , i' :: Iterator a -- iterators extend (\i' -> r2 (extend r1 i')) i = extend r2 (extend r1 i)Notice how we arrived at the exact same three equations, despite solving two completely unrelated problems. Something very deep seems to lie just beneath the surface.

#### The Command Pattern

Now imagine that we are trying to build a small DSL for manipulating a thermostat. The thermostat keeps an internal floating point temperature in Kelvin, which it presents to the user as a string representation in Celsius. The thermostat comes with a simple API:

- Increment the temperature by one degree
- Decrement the temperature by one degree

We choose to model our thermostat as a pair of values:

- The internal representation of temperature, in Kelvin
- A function that reads out the temperature into various representations

-- Use a newtype so we don't accidentally mix differerent -- representations of temperature newtype Kelvin = Kelvin { getKelvin :: Double } -- The thermostat type: (Kelvin, Kelvin -> a) -- 'a' is the readout type, which may varyWe can define an initial state for our thermostat that begins with a readout that converts the internal temperature in

`Kelvin`to

`Celsius`:

newtype Celsius = Celsius { getCelsius :: Double } deriving (Show) kelvinToCelsius :: Kelvin -> Celsius kelvinToCelsius (Kelvin t) = Celsius (t - 273.15) initialThermostat :: (Kelvin, Kelvin -> Celsius) initialThermostat = (298.15, kelvinToCelsius)We can always query the readout at any time using a function called

`extract`:

extract :: (Kelvin, Kelvin -> a) -> a extract (t, f) = f t

>>> extract initialThermostat 25.0Our client is not the sharpest crayon in the box, so we have to also provide an API for previewing changes in temperature before we make them:

up :: (Kelvin, Kelvin -> a) -> a up (t, f) = f (t + 1) down :: (Kelvin, Kelvin -> a) -> a down (t, f) = f (t - 1)

>>> up initialThermostat Celsius { getCelsius :: 26.0 } >>> down initialThermostat Celsius { getCelsius :: 24.0 }Similarly we can define a function to convert the current temperature into a user-friendly string:

toString :: (Kelvin, Kelvin -> Celsius) -> String toString (t, f) = show (getCelsius (f t)) ++ " Celsius"

>>> toString initialThermostat 25.0 CelsiusBut if what if I want to convert the previews into user-friendly strings? This won't type-check:

>>> toString (up initialThermostat) -- Type errorInstead, we must define adjustment functions that modify the internal temperature of the thermostat:

up' :: (Kelvin, Kelvin -> a) -> (Kelvin, Kelvin -> a) up' (t, f) = (t + 1, f) down' :: (Kelvin, Kelvin -> a) -> (Kelvin, Kelvin -> a) down' (t, f) = (t - 1, f)Now we can simulate an object-oriented API for interacting with the thermostat:

>>> thermostat1 = initialThermostat # up' >>> thermostat2 = thermostat1 # up' >>> toString thermostat2 27.0 CelsiusHowever, there's a potential source of bugs in this approach. When a user selects a given preview, nothing requires us to apply an adjustment that matches the preview. We can only enforce this by being sufficiently diligent programmers. Wouldn't it be nice, though, if we could eliminate an entire class of bugs by automatically converting the preview into the correct corresponding adjustment?

In other words, we have a preview function:

preview :: (Kelvin, Kelvin -> a) -> b... and we want to

`extend`it to behave like the corresponding adjustment function:

extend preview :: (Kelvin, Kelvin -> a) -> (Kelvin, Kelvin -> b)... which means that

`extend`has type:

extend :: ((Kelvin, Kelvin -> a) -> b) -> (Kelvin, Kelvin -> a) -> (Kelvin, Kelvin -> b)

**Exercise:**Write the

`extend`function.

**Solution:**

extend preview (t, f) = (t, \t' -> preview (t', f))If we apply

`extend`to

`up`, it should give us

`up'`:

extend up (t, f) -- Apply definition of 'extend' = (t, \t' -> up (t', f)) -- Apply definition of 'up' = (t, \t' -> f (t' + 1))Wait, what's this? This doesn't match the definition of

`up'`at all:

up' (t, f) = (t + 1, f)Which one is the "right" version? Well, we can decide which implementation is the correct one by specifying the desired behavior in the form of equations, and then seeing which implementation satisfies the equations.

We first expect that if you

`extract`the result of an adjustment, it should match the corresponding

`preview`.

**Exercise:**Prove that:

extract (extend preview thermostat) = preview thermostatBoth

`extend up`and

`up'`satisfy this criterion, so we can't yet say which one is correct.

We also expect that if you

`extend`a preview of the current state (i.e.

`extract`) to become an adjustment, then this adjustment should do nothing.

**Exercise:**Prove that:

extend extract thermostat = thermostatThis criterion doesn't apply to any previews other than

`extract`, so we can't use it to select between

`extend up`and

`up'`.

This leaves us with our final equation: If you combine an adjustment and preview, you can

`extend`the pair of them into an adjustment, which should be identical to

`extend`ing the preview alone.

**Challenge Exercise**: Prove that:

p1, p2 :: (Kelvin, Kelvin -> a) -> b t , t' :: (Kelvin, Kelvin -> a) extend (\t' -> p2 (extend p1 t')) t = extend p2 (extend p1 t')This proves to be the acid test that eliminates our original implementation of

`up'`.

**Challenge Exercise:**Prove that our original implementation of

`up'`does not play nice with

`extend`. In other words, find a counter-example that proves the following equation

**false**:

extend (\t' -> p (up' t')) t = extend p (up' t)

**Challenge Exercise:**What bug does the above counter-example predict may happen when you mix

`extend`with

`up'`?

#### Comonads

At this point, we've tackled three separate object-oriented problems and in all three of them we define an

`extract`and

`extend`function that seem very similar across all three cases. We already know that these two functions always seem to obey the same set of equations, despite having very different types in each case.

However, we can squint a little bit and realize that the types are not as different as they initially seem. Define:

type Builder a = [Option] -> a -- Keep 'Iterator' as is type Thermostat a = (Kelvin, Kelvin -> a)Using these type synonyms, we can rewrite the type signature for all three

`extract`functions:

extract :: Builder a -> a extract :: Iterator a -> a extract :: Thermostat a -> aAlso, it turns out that the type signatures for our

`extend`functions were too specialized. We could actually generalize them to the following more polymorphic types with no change to the code:

extend :: (Builder a -> b) -> Builder a -> Builder b extend :: (Iterator a -> b) -> Iterator a -> Iterator b extend :: (Thermostat a -> b) -> Thermostat a -> Thermostat bIn each case, we defined some type constructor

`w`and two functions:

extract :: w a -> a extend :: (w a -> b) -> w a -> w bThe combination of

`w`,

`extract`, and

`extend`is a comonad. The equations we've been proving are known as the "comonad laws".

#### Comonad laws

Why do we always seem to come across the same set of equations each time? Well, we can get a clue if we define a derived operator in terms of

`extend`:

(f =>= g) w = g (extend f w)This operator has the nice property that

`extract`is both its left and right identity:

extract =>= f = f f =>= extract = fAlso, this operator is associative:

(f =>= g) =>= h = f =>= (g =>= h)In other words, comonads form a category, specifically a "CoKleisli" category, where

`(=>=)`is the associative composition operator for the category and

`extract`is the identity of this composition. The comonad laws are nothing more than the category laws in disguise.

If you take the last three equations and substitute in the definition of

`(=>=)`, you will derive the same three comonad laws we have repeatedly proven.

#### Object-oriented programming

Every time we try to implement object-oriented programming in Haskell we gravitate, inexorably, to modeling objects as comonads. This suggests that object-oriented programming and comonadic programming are one and the same. Haskell programmers have struggled with comonads because we so militantly rejected object-oriented programming.

This means we should approach object oriented programming with humility instead of disdain and borrow object-oriented insight to devise a suitable syntactic sugar for programming with comonads.

#### Syntactic sugar for comonads

The object-oriented intuition for comonads suggests the syntactic sugar for comonads, which I call

`method`notation.

Given the following

`method`:

method wa> expr1 wb> expr2 wc> expr3... this desugars to:

\wa -> let wb = extend (\this -> expr1) wa wc = extend (\this -> expr2) wb in extract $ extend (\this -> expr3) wcWe can simplify the last line because of the comonad laws:

\wa -> let wb = extend (\this -> expr1) wa wc = extend (\this -> expr2) wb in (\this -> expr3) wcIn other words,

`method`notation

`extend`s every function except the last one. This is also equivalent to

`extend`ing all of them and

`extract`ing the result.

You can also leave out the bound variables on the left, which simply does not bring them into scope:

method expr1 expr2 expr3 = \_wa -> let _wb = extend (\this -> expr1) _wa _wc = extend (\this -> expr2) _wb in extract $ extend (\this -> expr3) _wcUsing the latter form, the configuration file example becomes:

config :: Config config = defaultConfig # method this # profile -- no apostrophes, these are setters this # goFasterThis desugars to:

config = defaultConfig # \_b0 -> let _b1 = extend (\this -> this # profile ) _b0 in extract $ extend (\this -> this # goFaster) _b1 -- equivalent to: config = defaultConfig # \_b0 -> let _b1 = extend profile _b0 in goFaster _b1 -- which reduces to: config = goFaster (extend profile defaultConfig)Notice how it looks like we are declaring an anonymous

`method`and immediately invoking it on the

`defaultConfig`object. Also, we only use setters and yet the

`method`does "the right thing" and does not

`extend`the last setter, as if we were returning the last line directly.

The iterator example works equally well:

next3 :: Iterator a -> a next3 = method this # next -- Move one step forward this # next -- Move another step forward this # next -- Return the next value -- desugars to: next3 = \_i0 -> let i1 = extend (\this -> this # next) _i0 i2 = extend (\this -> this # next) i1 extract $ extend (\this -> this # next) i2 -- which reduces to: next3 = \i -> next (extend next (extend next i))Here we are declaring

`next3`as if it were part of a class definition.

`method`notation implicitly makes it a function of the corresponding object and brings

`this`into scope, which always implicitly refers to the current state of the object.

If we want to refer to previous states, we just bring the intermediate steps into scope using the "prompt" notation:

next123 :: Iterator a -> [a] next123 = method this # next i1> this # next i2> this # next i3> [i1 # extract, i2 # extract, i3 # extract] -- desugars to: next123 = \_i0 -> let i1 = extend (\this -> this # next) _i0 i2 = extend (\this -> this # next) i1 i3 = extend (\this -> this # next) i2 in extract $ extend (\this -> [i1 # extract, i2 # extract, i3 # extract]) i3 -- which reduces to: next123 = \_i0 -> [ next _i0 , next (extend next _i0) , next (extend next (extend next i0)) ]The above

`method`returns the next three elements of the iterator, using the intermediate steps in the traversal. If we want to call it, we use it just like an object-oriented method:

>>> exampleHistory # next123 ["^C","eat flaming death","hello?"]More over,

`method`s automatically do "the right thing" if you use them within other

`method`s:

next123456 :: Iterator a -> [a] next123456 = method this # next123 w123> this # next123 w456> (w123 # extract) ++ (w456 # extract) -- desugars to: next123456 = \_w0 -> let w123 = extend (\this -> this # next123) _w0 w456 = extend (\this -> this # next123) w123 in extract # extend (\this -> (w123 # extract) ++ (w456 # extract)) w456 -- which reduces to: next123456 = \_w0 -> next123 _w0 ++ next123 (extend next123 _w0)

>>> exampleHistory # next123456 ["^C","eat flaming death","hello?","bye","exit","quit"]We don't have to carefully keep track of whether or not we should use them as accessors or "mutators".

`method`notation automatically gets that correct for us.

Notice the duality with

`do`notation and monads. With monads, unwrapped variables are scarce since we can irreversibly convert them to wrapped values, so

`do`notation keeps them in scope as long as possible. With comonads, wrapped variables are scarce since we can irreversibly convert them to unwrapped values, so

`method`notation keeps them in scope for as long as possible.

Our thermostat example looks just like the classic object-oriented example using

`method`notation, except we don't need to say

`return`at the end as

`method`notation always implicitly returns the value of the last line:

up2 :: Thermostat Celsius -> String up2 = method this # up this # up this # toString -- desugars to: up2 = \_th0 -> let _th1 = extend (\this -> this # up ) _th0 _th2 = extend (\this -> this # up ) _th1 in extract $ extend (\this -> this # toString) _th2 -- which reduces to: up2 = \_th0 -> toString (extend up (extend up _th0))You can even return the object itself, just by returning

`this`:

up2' :: Thermostat Celsius -> Thermostat Celsius up2' = method this # up this # up this up2 :: Thermostat Celsius -> String up2 th = toString (th # up2')If we inline the definition of

`up2'`back into

`up2`, we get:

up2 w = toString (w # method this # up this # up this)Any function we apply to an invoked

`method`can be converted to a post-fix application:

toString (w # method this # up this # up this) = (w # method this # up this # up this) # toStringObserve how suggestive the notation is. When we use post-fix syntax, we can just remove the parentheses and it is still correct:

(w # method this # up this # up this) # toString = w # method this # up this # up this # toStringThe post-fix application style plays incredibly nicely with

`method`syntax, even though I never designed it for that purpose. This suggests that the object-oriented tendency towards post-fix function application style falls out naturally from the comonadic style and is not just a quirk of object-oriented tradition.

#### Comonad laws

The acid test of syntactic sugar is that the notation promotes an intuition for the comonad laws. Let's write the comonad laws using

`method`notation:

extract (extend f w) = f w w # method = w # method this # f this # f this # extractThis law says that there's no need to "re-

`extract`" the current context at the end.

`method`notation already does that for you.

f (extend extract w) = f w w # method = w # method this # extract this # f this # fAll

`extract`commands are no-ops within a

`method`block since they point to our current location.

This leaves us with the final comonad law:

h (extend (\w' -> g (extend f w')) w) = h (extend g (extend f w))I'll do the intermediate translation steps for this law since they are illuminating. All we have to remember is that:

extend f w = w # method this # f thisUsing that, we can mechanically derive both sides of the equation:

-- Left-hand side: h (extend (\w' -> g (extend f w')) w) = h (w # method this # \w' -> g (extend f w') this ) = w # method this # \w' -> g (extend f w') this # h = w # method g (extend f this) this # h = w # method g (this # method this # f this ) this # h = w # method this # method this # f this # g this # h -- Right-hand side h (extend g (extend f w)) = h (extend f w # method this # g this ) = extend f w # method this # g this # h = (w # method this # f this ) # method this # g this # h = w # method this # f this # method this # g this # hPlacing them side by side gives:

w # method = w # method this # method this # f this # f this # method this # g this # g this # h this # h... and like

`do`notation, we can flatten both forms to a single normal form:

= w # method this # f this # g this # hThe notation suggests quite naturally that if you call a

`method`on

`this`, it's equivalent to inlining the

`method`directly. Conversely, you can arbitrarily factor out any group of steps into their own

`method`.

#### Comonad transformers

`do`notation has the nice property that it promotes the correct intuition for the monad transformer laws, where the

`lift`distributes over the

`do`block:

lift $ do x <- m = do x <- lift m f x lift (f x) lift (return x) = return x

`method`notation also promotes the correct intuition for comonad transformers where

`lower`similarly distributes over

`method`blocks:

w # lower # method = w # method this # f this # lower # f this # g this # lower # g w # lower # extract = w # extract

#### Conclusion

Object-oriented programming is the long-lost comonadic programming that Haskell programmers have been searching for. Comonads are "object-oriented programming done right".

Monads and

`do`notation transformed the face of Haskell by turning it into the finest imperative programming language. I believe that comonads and

`method`notation may similarly transform Haskell into the finest object-oriented language as well.

This is pretty fascinating! I've toyed around with comonads a bit, but it never occurred to me to think of them as objects.

ReplyDeleteI've also seen objects presented as negative recursive types (cf http://requestforlogic.blogspot.com/2012/03/what-does-focusing-tell-us-about.html); I'm wondering if there's some way of looking at them that unifies both perspectives? I'm guessing they're orthogonal, though, thanks to the many meanings of the word "object"; Cook-objects appear to be primarily concerned with negativity & mutual recursion, whereas comonadic objects (correct me if I'm wrong) appear to primarily concerned with the inner state of an object. It's interesting (though perhaps only superficially) that both approaches are dual to familiar approaches (datatypes and monads, respectively).

Are you familiar with Dominic Orchard's codo-notation (http://www.cl.cam.ac.uk/~dao29/drafts/codo-notation-orchard-ifl12.pdf)? It appears to be very similar to your method notation, but without the implicit "this" argument. There's also od-notation, but a few moments of quick googling didn't reveal a link to it (though they did reveal an eye doctor in New Hampshire! http://www.eyesightnh.com/new-hampshire/susan-haskell-o-d-f-a-a-o..htm).

Wow, that first link is really good. It very closes mirrors some observations and intuitions I built in the process of working with comonads. For example, comonads and `method` notation resist embedding any effects in between steps. I just answered another person on reddit who asked me about embedding these comonadic computations within a Kleisli category:

Deletehttp://www.reddit.com/r/haskell/comments/18isiu/comonads_are_objects/c8f9fw0

The summary is that comonads stubbornly resist any useful interleaving of monadic side effects, which exactly mirrors how that link envisioned the use of these negative recursive types as views.

Moreover, the idea of using comonads as a more powerful case analysis is strongly suggested by "THE" comonad: the cofree comonad. If you combine the cofree comonad with method syntax, you get a DSL for case analysis on the base functor of the cofree comonad.

I am familiar with Dominic Orchard's codo notation, and the entire reason I investigated this line of reasoning was that I was unsatisfied with his approach, which didn't behave the way I expected the rightful dual to 'do' notation to behave. For example, he was still binding unwrapped values within the monad, which seemed intuitively incorrect, and the application of maintaining simultaneity only made sense for a couple of comonads and not all of them.

However, the thing that was most unsatisfying about his approach was the fact that the desugaring was so complicated and required additional structure (i.e. ComonadZip) on top of the Comonad class to implement correctly.

Hm, cool. I'll have to think about the Kleisli category stuff more; I'm not as up on category theory as I'd like to be. I'd be interested to see more about case analysis with the cofree comonad; I'm not entirely sure what that means, exactly.

ReplyDeleteIn the Reddit thread, you mention CoIO; I assume you've read Kieburtz's "Codata and Comonads in Haskell"? He describes the OI comonad there, and some possible ways of using it, but apparently it has issues (http://www.haskell.org/pipermail/haskell-cafe/2006-November/019265.html). I think it's possible to use it for effects in a more restricted setting where information is preserved (coincidentally, my research is on information preservation...), but in a more traditional setting, your intuition matches mine: it seems like OI a (or CcOI a) "should" be the type of pure values of type a. If that's the case, it's possible that it would be more productive (ha) to explore it in an eager language (Idris, perhaps). I think I read something to this effect elsewhere, but I can't remember where.

One side note that I think is interesting: correct me if I'm wrong, but I believe that in modal logic, the diamond/"possibility" operator can be thought of as the free monad, and the lax operator can be thought of as the free strong monad. The box/"necessity" operator, however, doesn't act like the free [costrong?] comonad, because you have the intro rule:

\Delta, \empty |- A

---------------------[]I

\Delta, \Gamma |- []A

This is going off of the presentation in Pfenning-Davies (http://www.cs.cmu.edu/~fp/papers/mscs00.pdf), in particular.

But anyway, this rule gives you things like T |- []T which seems...wrong, given that there's no corresponding theorem <>_|_ |- _|_ (pardon the ascii). Again, my category theory is rusty, so maybe that's acceptable, but it seems kind of off; my intuition says you shouldn't be able to get into the cofree comonad (or whatever) unless you're already in it!

Anyway, that's probably a bit rambly at the end there, sorry. Maybe it'll be useful? *shrug*

Could you elaborate more on your research about preserving information? This is a topic that has fascinated me as well.

DeleteMy intuition about CoIO is that if you were to implement it in terms of CoFree, the key function the user would write would have type:

forall r . CoFree f r -> r

In other words, the way you define 'CoIO' behavior is simply by selecting one 'r' value from the CoFree stream. The universal quantification keeps you honest and forces you to select a value from the CoFree comonad.

For example, the 'r' values could just be assembly code, and depending on which 'r' you select decides which program you compile. However, that approach does not work well for various reasons, but I'm just throwing that crazy idea out there.

I've never read the "Comonads and Codata" paper before, but I remember that I rejected a similar line of thinking because any function of type "a -> ()" should be isomorphic to "()", which means that there should only be one such function. I'm not sure that comonads are supposed to be able to encapsulate effects, particularly when monads do so incredibly well. It would seem odd to me for both an abstraction and its dual to both overlap in functionality.

I'm going to preface the logic stuff by saying that logic is totally a weak point of mine. I'm not familiar with the concrete rules of most logic systems since almost everything I've learned about computer science is just a side effect of programming in Haskell, but I'll make an effort to try to follow what you are saying by consulting the relevant Wikipedia articles. :)

So if diamond is possibility, and it's a monad, then we'd expect that:

<><> p -> <> p

p -> <> p

So far so good. If it's a free monad, then there must be an adjunction (I'm going to bastardize notation by mixing logic and Haskell):

(f? p -> m p) ~ ((Monad m) => <> p -> m p)

See, here's the part that's a bit confusing. A free monad requires defining some sort of base functor, but in the case of '<>' it's not clear what that base functor is. Or in other words:

Free f p = <> p implies f = ?

A free monad is at heart a list of 0 or more nested applications of the given functor, so I'm wondering what modal logic functor, when applied 0 or more times, is equivalent to the possibility operator.

The other part that's curious is that it seems like box also should be a monad:

p -> [] p

[][] p -> [] p

Are those valid rules in modal logic?

Also, there's nothing about comonads that says you can't build them. A key point to remember is that the definitions of monads and comonads are positive: they specify a uniform interface to what you can do, and don't forbid anything. Specifically, they don't forbid you from being able to unwrap the monad (with the Identity, Reader, and State monads being the canonical counter-examples). However, these unwrapping operations are non-uniform across monads, whereas the monad operations are uniform across them, so it's better to think of the monad class as simply specifying the uniform property that all monads share.

So in the same way that I don't necessarily expect a monad to be unwrappable, I also don't expect a comonad (even the CoIO comonad) to be uncreatable.

I'm doing with with Amr Sabry at Indiana University, specifically on extending stuff done in his student Roshan James' thesis on "information effects". They have a paper from POPL '12 that's pretty rad: http://delivery.acm.org/10.1145/2110000/2103667/p73-james.pdf?ip=129.79.245.33&acc=ACTIVE%20SERVICE&CFID=225224900&CFTOKEN=62904902&__acm__=1360956345_7a3d0778ff13776dc280f100adbe9ad9 , if it's not paywalled for you.

DeleteAs far as the base functor is concerned, I'm not actually sure---I'm not up on my categorical logic, unfortunately. Some of Steve Awodey's lecture notes talk about <> and [] as a monad and a comonad; if you ctrl+f "modal" in http://www.andrew.cmu.edu/course/80-413-713/notes/chap10.pdf it's the page with the 2nd and 3rd result. I'm not sure if that's helpful or not, though. Maybe that means they're not free after all? I'm not sure. I think I'd heard someone say they were, but maybe I'm misremembering; I do know that the only operations available on <> (and lax) are only return and bind, though.

Box isn't a monad: the intro rule only allows you to use persistent assumptions when trying to prove []A, erasing your regular context. So if you tried to prove A -> []A, you'd stick A in your context, then immediately forget it. It's bad news! But this means you can prove A -> []A for exactly those A which are equivalent to T. There's no corresponding rule for <> or () that allows you to get out of the monad exactly when the thing in the monad is bottom, though.

And yeah, I guess I might be conflating freeness with the idea that only a certain set of operations is allowed, *and no more*. I guess "cofree" doesn't make sense in that interpretation, though, or at least no sense I can make of it. But the idea is that if you can *only* use those operations, then there's no way to get out of the fancy monad, and no way to get into the fancy comonad. This property is definitely desirable for the IO monad, and Kieburtz seems to have assumed it for his OI comonad.

I should also note that there are tons of different modal logics; I believe the one I'm referring to is canonically called S5 (or IS5, I guess, since intuitionistic logic is where it's at). The paper I linked to is a good reference, if you have the time for it; Frank Pfenning also has some awesome lecture notes on his site. I'd probably recommend them if you want to start learning more about logic in general. He's got an undergrad constructive logic course (http://www.cs.cmu.edu/~fp/courses/15317-f09/) that might be helpful for some basics, but they're also covered briefly in the beginning of his modal logic (http://www.cs.cmu.edu/~fp/courses/15816-s10/) and linear logic (http://www.cs.cmu.edu/~fp/courses/15816-s12/) course notes. Also, I dunno if you're an undergrad or a grad student or a postdoc or professor or industry person or hobbyist or what, but have you heard of OPLSS (http://www.cs.uoregon.edu/Activities/summerschool/summer13/)? Frank gave a great series of talks on logic last year, and iirc he does it pretty much every year.

With respect to the Kieburtz paper, why do you bring up a -> () ? Maybe there's an obvious reason to do so, but I'm missing it, if so. Also, you mention that it'd be weird for an abstraction and its dual to have the same use, which is intuition I share, but it can be wrong. In particular, the reader monad is isomorphic to the product comonad (as proved in http://www.cs.ioc.ee/~tarmo/papers/cmcs08.pdf, which is a great read if you haven't seen it already). So there can be some overlap going on. I also do like the idea of passing around a "token" of sorts that gives you permission to access IO stuff, but you'd need at the very least a linear type system to be able to keep track of it, and using it as a modality is kind of trivial, so yeah, maybe not the best approach.

Thanks for all the links. I'm just a graduate student doing bioinformatics with a keen interest in Haskell but the more I use the language the more I get sucked up into computer science.

DeleteRegarding the Kieburtz paper, many of the OI functions he proposes have that type, such as:

stdPutChar :: OI Char -> ()

That type signature sort of bothers me, because I would expect there to be only one function (up to isomorphism) with that type, namely:

stdPutChar _ = ()

... but maybe that's a faulty intuition that I've built from using Haskell. Or maybe he had the right idea, but it belongs in a different category other than the category of Haskell functions, i.e.:

stdPutChar :: C (OI Char) ()

On "Pfenning-Davies" - since I'm Davies: it's actually modal IS4 we focus on rather than IS5 (which wouldn't have such nice computational properties).

DeleteAlso the []I rule should be:

\Delta ; \empty |- A

---------------------------[]I

\Delta ; \Gamma |- []A

Here the semicolons separate two different contexts. The first context contains assumptions about validity, which hold in all reachable worlds. The second context holds assumptions about truth, which apply only for the current world.

So, we can derive (using . for an empty context):

A valid ; . |- []A true

But not:

. ; A true |- []A true

The []I rule is essentially similar to the "extend" function, but expressing it using two kinds of assumptions leads to the system having particularly nice properties. Dually, there's a second kind of conclusion for possibility, related to the diamond <> modality.

It should be clear that [] corresponds to a comonad, and <> corresponds to a monad. Further the two are related in a very particular way, as required by modal logic. As a result, e.g., <> is strong with respect to the first context but not the second.

Wow! Thanks for the explanation.

DeleteMy understanding of what you said is that "necessarily" (i.e. the [] operator) reflects a property that must be true of all reachable worlds, not just the current one. So I think your []I rule says something like:

"If we can infer 'A' even from an empty current world, that means that its truth must be independent of the selected world".

Or, in other words, the [] reflects some sort of truth that *must* originate from a world-independent source.

Then that would make sense as a comonad, since it's obviously true that if is something is true in a world-independent way, then it's still true in a world-dependent way:

[]A -> A

Similarly, if 'A' is true in a world independent way, then the "fact that it is true in a world-independent way" is itself true in a world-independent way:

[]A -> [][]A

In other words, world-independence is itself a world-independent property.

have you seen tomas petricek's "Coeffects: The Essence of Context Dependence"? just a draft but looks interesting (and relevant.)

ReplyDeletehttp://www.cl.cam.ac.uk/~tp322/drafts/coeffects.html

I just glossed over it. This actually has some fascinating material for additional uses of comonads. I particularly liked the liveness analysis application. I will have to take time to digest it some more.

DeleteWow, nice! There's a small typo in discussion of the Iterator pattern: "to be remain consistent" -> "to be consistent" or "to remain consistent". Also, I think you meant

ReplyDeletelet builder1 = defaultConfig # profile'

instead of

>>> let builder1 = defaultBuilder # profile'

Thanks! I fixed them.

DeleteHey, your 'exampleHistory' snippet won't compile, because :< has default fixity. Making it infixr 5 (like cons) fixes the issue.

ReplyDeleteYou're right. I added the fixity definition.

DeleteHi Gabriel,

ReplyDeleteyou often write "objected-oriented" and "objected oriented" which may be a subtle pun underlining your thesis that Haskell frowns upon object-orientation. Is this intentional, or did you intend to use the common term "object-oriented"?

Actually, that was a typo (or perhaps a Freudian slip!). I will fix it soon.

DeleteAnd here I was starting to think that designing programs through the communication of possibly stateful, ideally referentially-transparent entities over well defined interfaces (pure pipes/lazy pure fp/pure TPL Dataflow Block/) was object-orientation done right! That is, if OOD is to be defined by its published benefits.

ReplyDeleteThis post is about comonads more than it is about this object oriented programming. This post introduces comonads as a subset of object oriented programming, specifically the fluent programming style pioneered by JQuery. However, I am not done with the analogy and I already know of several other striking parallels to OOP that I have not written up yet, including parallels to inheritance and traits.

DeleteIt does not bother me in the least, though, that comonads do not cover the full spectrum of OOP as OOP had become an umbrella term for a wide variety of unrelated functionality. I'm simply showing that comonads cover a surprising subset of OOP functionality without any built-in language support for OOP.

One thing I find endearing about Haskell is that, unlike other languages it does not compromise its elegance or simplicity in order to be a "multi paradigm language". Rather it takes the principled position that functional programming is sufficient to implement all other forms of programming. This post and future posts build on that idea to show how even OOP can be a subset of functional programming.

Hi Gabriel,

ReplyDeleteCool posting!

Is there a typo when you first introduce the method desugaring?

It looks like there may be too many wb's (or _wb's) and not enough

wc's (or _wc's)...

Sorry for the really late response. You were right and I fixed it. Thanks for pointing that out. That's a pretty important thing to get right. :)

DeleteSorry for being late to the party, but I found this article really interesting, not to mention useful.

ReplyDeleteMy solution to implementing extend for Thermostats was:

extend preview (t, f) = (preview (t, id), f)

As I understand the question, the extended preview is supposed to *actually* change the thermostat. The above version seems to do that better, in that it changes the left part of the tuple (what I think of as the "actual" underlying temperature setting). The conversion function is then just left as-is.

I think your version doesn't type-check, though. If `preview` has type:

Deletepreview :: (Kelvin, Kelvin -> a) -> b

... then `id` would only be a valid argument for the special case where `a = Kelvin`.

Also, your version does not guarantee that:

extract (extend preview thermostat) = preview thermostat

... because you get:

extract (extend preview (t, f))

= extract (preview (t, id), f)

= f (preview (t, id))

... which is not necessarily the same thing as:

preview (t, f)

I really liked this article, and learnt a lot going through the exercises. But I do recommend the answer blog post "comonads are neighbourhoods not objects" which has very good criticism of the thesis developed here. At least it convinced me. But I learnt a lot following the argumentation in any case. http://gelisam.blogspot.co.uk/2013/07/comonads-are-neighbourhoods-not-objects.html

ReplyDelete