#### Interpreters

Good programmers decompose data from the interpreter that processes that data. Compilers exemplify this approach, where they will typically represent the source code as an abstract syntax tree, and then pass that tree to one of many possible interpreters. We benefit from decoupling the interpreter and the syntax tree, because then we can interpret the syntax tree in multiple ways. For example, we could:

- compile it to an executable,
- run it directly (i.e. the traditional sense of "interpret"),
- pretty print it,
- compress and archive it,
- or do nothing at all with it!

Let's try to come up with some sort of abstraction that represents the essence of a syntax tree. Abstractions always begin from specific examples, so let's invent our own toy programming language and try to represent it as a data type.

Our toy language will only have three commands:

output b -- prints a "b" to the console bell -- rings the computer's bell done -- end of executionSo we represent it as a syntax tree where subsequent commands are leaves of prior commands:

data Toy b next = Output b next | Bell next | DoneNotice how the

`Done`command has no leaf since it must be the last command.

Then I could write a sample program that I might want to pass to an interpreter:

-- output 'A' -- done Output 'A' Done :: Toy Char (Toy a next)... but unfortunately this doesn't work because every time I want to add a command, it changes the type:

-- bell -- output 'A' -- done Bell (Output 'A' Done) :: Toy a (Toy Char (Toy b next)))Fortunately, we can cheat and use the following data type to wrap as many

`Toy`s as we want into the same data type:

data Cheat f = Cheat (f (Cheat f))With

`Cheat`we've defined a stream of functors that will only end when it gets to the

`Done`constructor. Fortunately,

`Cheat`already exists in Haskell and goes by another name:

data Fix f = Fix (f (Fix f))It's named

`Fix`because it is "the fixed point of a functor".

With

`Fix`in hand, now we can fix our example programs:

Fix (Output 'A' (Fix Done)) :: Fix (Toy Char) Fix (Bell (Fix (Output 'A' (Fix Done)))) :: Fix (Toy Char)Now they have the same type. Perfect! Or is it?

There's still a problem. This approach only works if you can use the

`Done`constructor to terminate every chain of functors. Unfortunately, programmers don't often have the luxury of writing the entire program from start to finish. We often just want to write subroutines that can be called from within other programs and our

`Fix`trick doesn't let us write a subroutine without terminating the entire program.

Ok, so let's hack together a quick and dirty fix to work around this problem. Our subroutine finished but we are not ready to call

`Done`, so instead we throw an exception and let whoever calls our subroutine catch it and resume from where we left off:

data FixE f e = Fix (f (FixE f e)) | Throw eThen we write a

`catch`function:

catch :: (Functor f) => FixE f e1 -> (e1 -> FixE f e2) -> FixE f e2 catch (Fix x) f = Fix (fmap (flip catch f) x) catch (Throw e) f = f eWe can only use this if

`Toy b`is a functor, so we muddle around until we find something that type-checks (and satisfies the Functor laws):

instance Functor (Toy b) where fmap f (Output x next) = Output x (f next) fmap f (Bell next) = Bell (f next) fmap f Done = DoneNow we can write code that can be caught and resumed:

data IncompleteException = IncompleteException -- output 'A' -- throw IncompleteException subroutine = Fix (Output 'A' (Throw IncompleteException)) :: FixE (Toy Char) IncompleteException -- try {subroutine} -- catch (IncompleteException) { -- bell -- done -- } program = subroutine `catch` (\_ -> Fix (Bell (Fix Done)) :: FixE (Toy Char) e

#### Free Monads - Part 1

So we proudly package up this "improved"

`Fix`and release it on Hackage under the package name

`fix-improved`, and then find out that the users are misusing the library. They start using the exception to pass around ordinary values instead of exceptional values. How dare they! Exceptions are only for

**exceptional**situations and not for ordinary flow control. What a bunch of morons!

... except we are the morons, because our

`FixE`already exists, too, and it's called the Free monad:

data Free f r = Free (f (Free f r)) | Pure rAs the name suggests, it is automatically a monad (if

`f`is a functor):

instance (Functor f) => Monad (Free f) where return = Pure (Free x) >>= f = Free (fmap (>>= f) x) (Pure r) >>= f = f rThe

`return`was our

`Throw`, and

`(>>=)`was our

`catch`. Our users were actually using the

`e`values as return values because that is the correct way to use them within a monad.

The great part about Haskell is that for any monad we get

`do`notation for free. However,

`Free (Toy b)`is the monad, not

`Toy b`, which means that if we want to sequence our primitive commands using

`do`notation, we have convert our commands of type

`Toy b`into

`Free (Toy b)`. Our attempt to do so produces something that looks like this:

output :: a -> Free (Toy a) () output x = Free (Output x (Pure ())) bell :: Free (Toy a) () bell = Free (Bell (Pure ())) done :: Free (Toy a) r done = Free DoneI'll be damned if that's not a common pattern we can abstract:

liftF :: (Functor f) => f r -> Free f r liftF command = Free (fmap Pure command) output x = liftF (Output x ()) bell = liftF (Bell ()) done = liftF DoneNow, we can sequence these primitive commands using

`do`notation, and everything just works! Let's translate our previous example, getting rid of the superfluous exceptions:

subroutine :: Free (Toy Char) () subroutine = output 'A' program :: Free (Toy Char) r program = do subroutine bell doneThis is where things get magical. We now have

`do`notation for something that hasn't even been interpreted yet: it's pure data. Newcomers to Haskell often associate monads with side effects or actions, but the above code does nothing more than build a data type. We can prove that it is still just an ordinary data type by defining a function to convert it to a string:

showProgram :: (Show a, Show r) => Free (Toy a) r -> String showProgram (Free (Output a x)) = "output " ++ show a ++ "\n" ++ showProgram x showProgram (Free (Bell x)) = "bell\n" ++ showProgram x showProgram (Free Done) = "done\n" showProgram (Pure r) = "return " ++ show r ++ "\n".. and printing it:

>>> putStr (showProgram program) output 'A' bell doneIt looks like we just inadvertently defined our first interpreter: the pretty printer! We can use our pretty printer to quickly check that our monad obeys some of the monad laws:

pretty :: (Show a, Show r) => Free (Toy a) r -> IO () pretty = putStr . showProgram

>>> pretty (output 'A') output 'A' return () >>> pretty (return 'A' >>= output) output 'A' return () >>> pretty (output 'A' >>= return) output 'A' return () >>> pretty ((output 'A' >> done) >> output 'C') output 'A' done >>> pretty (output 'A' >> (done >> output 'C')) output 'A' doneNotice how

`Done`swallows all commands after it, unlike

`Pure`. I only included

`Done`in the

`Toy`functor for illustrative purposes. In many cases you don't need a

`Done`-like constructor in your functor since you probably want

`Pure`'s resumable behavior, however in other cases you may actually want

`Done`'s "abort" semantics.

We could also write an actual interpreter in the conventional sense of the word:

ringBell :: IO () -- some obnoxious library would provide this interpret :: (Show b) => Free (Toy b) r -> IO () interpret (Free (Output b x)) = print b >> interpret x interpret (Free (Bell x)) = ringBell >> interpret x interpret (Free Done ) = return () interpret (Pure r) = throwIO (userError "Improper termination")The free monad is completely agnostic as to how it is used.

#### Concurrency

Let's say we have two monadic "threads" we want to interleave. For

`IO`, we could just use

`forkIO`to run them in parallel, but what if we wanted to thread two

`State`monads or even two

`Cont`monads. How would that even work?

Well, we could try representing a thread as a list of individual monad actions.

type Thread m = [m ()]... but this doesn't guarantee that our interpreter will call them in the order we list them, nor does it allow us to pass return values between successive monad actions. We can enforce their ordering, though, by nesting each subsequent action within the previous one, and if there are no more actions left, we use a separate constructor to indicate we are done:

data Thread m r = Atomic (m (Thread m r)) | Return rThis nesting forces the first action to be evaluated before the next one can be revealed and the

`Atomic`constructor wraps one indivisible step. We can then turn any single monad invocation into an atomic

`Thread`step:

atomic :: (Monad m) => m a -> Thread m a atomic m = Atomic $ liftM Return mNow we need a way to make

`Thread`a monad, but we will just "pretend" that we sequence two threads while still keeping their atomic steps separate so that we can later interleave them with other threads.

instance (Monad m) => Monad (Thread m) where return = Return (Atomic m) >>= f = Atomic (liftM (>>= f) m) (Return r) >>= f = f rUsing this, we can write threads broken into atomic steps:

thread1 :: Thread IO () thread1 = do atomic $ print 1 atomic $ print 2 thread2 :: Thread IO () thread2 = do str <- atomic $ getLine atomic $ putStrLn strAll we are missing is a way to interleave two threads, while still maintaining the atomicity of the individual steps. Let's just do a naive alternation:

interleave :: (Monad m) => Thread m r -> Thread m r -> Thread m r interleave (Atomic m1) (Atomic m2) = do next1 <- atomic m1 next2 <- atomic m2 interleave next1 next2 interleave t1 (Return _) = t1 interleave (Return _) t2 = t2Now we need a way to run threads after we are done interleaving them:

runThread :: (Monad m) => Thread m r -> m r runThread (Atomic m) = m >>= runThread runThread (Return r) = return r

>>> runThread (interleave thread1 thread2) 1 [[Input: "Hello, world!"]] 2 Hello, world!Magic! We just wrote a primitive threading system in Haskell! Now try using it with the pure

`State`monad.

#### Free Monads - Part 2

If you've been paying attention,

`Thread`is just

`Free`in disguise and

`atomic`is

`liftF`. The above example shows how a free monad greatly resembles a list. In fact, just compare the definition of

`Free`to the definition of a

`List`:

data Free f r = Free (f (Free f r)) | Pure r data List a = Cons a (List a ) | NilIn other words, we can think of a free monad as just being a list of functors. The

`Free`constructor behaves like a

`Cons`, prepending a functor to the list, and the

`Pure`constructor behaves like

`Nil`, representing an empty list (i.e. no functors).

So if a

`List`is a list of values, and a free monad is just a list of functors, what happens if the free monad's functor is itself a value:

type List' a = Free ((,) a) () List' a = Free ((,) a) () = Free (a, List' a)) | Pure () = Free a (List' a) | Pure ()It becomes an ordinary list!

A list is just a special case of a free monad. However, the

`Monad`instance for

`[]`is not the same thing as the

`Monad`instance for

`List' a`(i.e.

`Free ((,) a)`). In the

`List' a`monad,

`join`behaves like

`(++)`and

`return`behaves like

`[]`, so you can think of the

`List' a`monad as just being a fancy way to concatenate values using

`do`notation.

When you think of free monads as lists, a lot of things become much more obvious. For example,

`liftF`is just like the singleton list, creating a free monad with exactly one functor in it:

singleton x = Cons x Nil -- i.e. x:[], or [x] liftF x = Free (fmap Pure x)Similarly, our

`interleave`function is just a list merge:

merge (x1:xs1) (x2:xs2) = x1:x2:merge xs1 xs2 merge xs1 [] = xs1 merge [] xs2 = xs2 -- this is actually more similar to: -- [x1] ++ [x2] ++ interleave xs1 xs2 interleave (Atomic m1) (Atomic m2) = do next1 <- liftF m1 next2 <- liftF m2 interleave next1 next2 interleave a1 (Return _) = a1 interleave (Return _) a2 = a2So really, when you think of it that way, concurrency is nothing more than merging a bunch of lists of actions. In a later post, I will review a great paper that demonstrates how you can actually build elegant and robust threading systems and schedulers using this free monad approach.

It's not a coincidence that free monads resemble lists. If you learn category theory, you'll discover that they are both free objects, where lists are free monoids, and free monads are ... well, free monads.

#### Interpreters - Revisited

In the first section I presented the concept of using free monads for interpreters, but the concept of an interpreter is more powerful and useful than it sounds and it's not just limited to compilers and pretty printers.

For example, let's say you wanted to one-up Notch's game idea for

`0x10c`and make a player-programmable game ... except in Haskell! You want to accept programs from players that they can run in the game, but you don't want to give them full-blown access to the

`IO`monad, so what do you do?

The naive approach might be to copy the Haskell language's original design, where output is presented as list of requests made to the outside world and input is presented as a list of responses received from the outside world:

main :: [Response] -> [Request]The

`Request`type would enumerate the sort of actions you could take and the

`Response`type would delimit the results you would get back. Then for our game, the set of inputs might be:

data Request = Look Direction | ReadLine | Fire Direction | WriteLine String... and the responses might be:

data Response = Image Picture -- Response for Look | ChatLine String -- Response for Read | Succeeded Bool -- Response for WriteWell, that certainly won't work. There is no clear coupling between requests and responses (

`Fire`doesn't even have a response), and it's not clear what should happen if you try to read responses before you even generate requests.

So let's try to impose some kind of order on these inputs and outputs by merging them into a single data type:

data Interaction next = Look Direction (Image -> next) | Fire Direction next | ReadLine (String -> next) | WriteLine String (Bool -> next)Each constructor can have some fields the player fills in (i.e. the player's requests), and they can also provide functions which the interpreter will supply input to. You can think of this

`Interaction`type as the contract between the programmer and the interpreter for a single step.

Conveniently,

`Interaction`forms a functor:

instance Functor Interaction where fmap f (Look dir g) = Look dir (f . g) fmap f (Fire dir x) = Fire dir (f x) fmap f (ReadLine g) = ReadLine (f . g) fmap f (WriteLine s g) = WriteLine s (f . g)Actually, you don't even have to write that. GHC provides the

`DeriveFunctor`extension, which would you let you just write:

data Interaction ... deriving (Functor)... and it will get it correct.

As always, we can create a list of actions by using the

`Free`monad:

type Program = Free InteractionWith

`Program`in hand, the player can now write a simple program:

easyToAnger = Free $ ReadLine $ \s -> case s of "No" -> Free $ Fire Forward $ Free $ WriteLine "Take that!" (\_ -> easyToAnger) _ -> easyToAngerThe interpreter can then interpret the program for him, perhaps converting it into some sort of

`Game`monad:

interpret :: Program r -> Game r interpret prog = case prog of Free (Look dir g) -> do img <- collectImage dir interpret (g img) Free (Fire dir next) -> do sendBullet dir interpret next Free (ReadLine g) -> do str <- getChatLine interpret (g str) Free (WriteLine s g) -> putChatLine s interpret (g True) Pure r -> return rEvery free monad is guaranteed to be a monad, so we can always give the player syntactic sugar for writing their programs using Haskell

`do`notation:

look :: Direction -> Program Image look dir = liftF (Look dir id) fire :: Direction -> Program () fire dir = liftF (Fire dir ()) readLine :: Program String readLine = liftF (ReadLine id) writeLine :: String -> Program Bool writeLine s = liftF (WriteLine s id)Now, the player can more easily write their program as:

easyToAnger :: Program a easyToAnger = forever $ do str <- readLine when (str == "No") $ do fire Forward -- Ignore the Bool returned by writeLine _ <- writeLine "Take that!" return ()In short, we've given the player a sand-boxed interaction language that delimits their actions, yet complete with all the syntactic monad sugar and luxuries of programming in Haskell. On top of this, we've given ourselves the complete freedom to interpret the player's program any way we please. For example, if I were to release a patch tomorrow that changed the game world (and Haskell had some form of code hot-swapping), I could keep running the players' programs without interruption by just switching out the interpreter. Or, if I were sadistic, I could use the most aggressive player's program to control a real-world destructive robot of doom (a.k.a. the

`IO`monad) and watch it wreak havoc.

#### Free Monads - Part 3

The free monad is the interpreter's best friend. Free monads "free the interpreter" as much as possible while still maintaining the bare minimum necessary to form a monad.

Free monads arise every time an interpreter wants to give the program writer a monad, and nothing more. If you are the interpreter and I am the program writer, you can push against me and keep your options as free as possible by insisting that I write a program using a free monad that you provide me. The free monad is guaranteed to be the formulation that gives you the most flexibility how to interpret it, since it is purely syntactic.

This notion of "freeing the interpreter" up as much as possible sounds a lot like an optimization problem, which you might phrase as follows:

What is the most flexible monad to interpret, given the constraint that it still must be a monad?In fact, maximizing some notion of "freeness" given a constraint is the intuition that leads to the category theory definition of a free object, where the concept of "freeness" is made rigorous. A free monad just happens to be the "free-est" object that still forms a monad.

Great Article! The best I've found regarding an explanation of how the Free monad works

ReplyDeleteThis is awesome. How does the machinery work for non-linear languages, for example data Expr a = Value a | Plus a a?

ReplyDeleteIt forks the current context. For example, let's say I write:

DeleteforkPlus :: Free Expr Bool

forkPlus = liftF $ Plus False True

Then it would behave just like C's fork implementation, where the return value tells you which branch of the computation you are on:

do

bool <- forkPlus

if bool

then ... -- On the right branch

else ... -- On the left branch

Of course, you don't have to do it that way. You can always still use the conventional way to build the AST without the monad instance, by just defining:

plus :: Free Expr a -> Free Expr a -> Free Expr a

plus e1 e2 = Free $ Plus e1 e2

Glad I finally bit the bullet and read my tabs on Free monads. I think they're what I've been looking for for a number of applications. Great writing!

ReplyDeleteExcellent topic. Excellent writing. Every time I come back to haskell I generally spend a few days hammering boilerplate monad instantiation back into my head. I was also unaware that deriving functors was possible. You saved me a few days and then some :).

ReplyDeleteIn ` (Free x) >>= f = Free (fmap (>>= f) x)`, shouldn't there be a 'flip' before >>= ?

ReplyDeleteNo, it is correct. I think it is more clear if I expand out the definition a little bit:

Delete(Free x) >>= f = Free (fmap (\m -> m >>= f) x)

Haskell's section syntax says that if (*) is some operator, then:

(* b) = \a -> a * b

(a *) = \b -> a * b

This can be a bit confusing because if you were to instead put the parentheses around the operator, then the operator is interpreted using prefix notation instead of section notation:

(*) a b = a * b

... which is confusing since `(* a)` and `(*) a` look very similar, but have different meanings:

(* a) = \x -> x * a

(*) a = \x -> a * x

The instance definition of fmap for Toy b seems to reduce to saying that fmap f is just the identity function for any f. Is that right?

ReplyDeleteActually, it does change the Toy b x. Note that the functor definition is not recursive.

DeleteGreat article, thanks!

ReplyDeleteYou're welcome!

DeleteYour initial example is distracting to me. You say you can't add commands to the program because the type always changes but actually the only reason the type changes is that you specify "nextstep" as a type parameter when it will actually only ever be Toy a. So the way you could "cheat" would be to define Toy in the normal way:

ReplyDeleteToy a = Output a (Toy a) | Bell (Toy a) | Done

The target audience of my post is people who have never been introduced to the idea of using a recursive data type, particularly a functor, to model commands. These people typically come from an imperative background that distinguishes statements and expressions. This is why the introduction explicitly dwells on that particular wrong way of doing things.

DeleteThis comment has been removed by the author.

DeleteThe section on Interaction deserves its own post. What do we do when we want to implement a UI for the game instead of an AI? I imagine we'd do something like the following:

ReplyDeleteDefine a type of Plans over some other computation, like Program above

type Plan = FreeT Interaction

Provide syntactic sugar for building a Plan:

liftMethod :: (Functor f, Monad m) => ((a -> FreeT f m a) -> f (FreeT f m a)) -> FreeT f m a

liftMethod f = FreeT (return (Free (f return)))

look :: (Monad m) => Direction -> Plan m (Image)

look direction = liftMethod (Look direction)

liftFT :: (Functor f, Monad m) => (FreeT f m () -> f (FreeT f m ())) -> FreeT f m ()

liftFT a = FreeT (return (Free (a (return ()))))

fire :: (Monad m) => Direction -> Plan m ()

fire direction = liftFT (Fire direction)

readLine :: (Monad m) => Plan m (String)

readLine = liftFT (ReadLine)

writeLine :: (Monad m) => String -> Plan m (Bool)

writeLine message = liftMethod (WriteLine message)

I thing liftFT could be rewritten in terms of liftF, or fire could be defined as:

fire direction = liftF (Fire direction id)

I haven't figured out a more elegant liftMethod.

Then our UI could be written as

ui :: Direction -> Plan IO ()

ui initialDirection = do ...

Code to look, display an image, check for a chat message, display a chat, get input, and decide to change what direction we are looking / fire / or send a chat

I'm not sure how we can poll for a new incoming chat message with ReadLine, since it seems like it would block until there is a String to pass to next. Perhaps it should be:

data Interaction next =

Look Direction (Image -> next)

| Fire Direction next

| ReadLine (Maybe String -> next)

| WriteLine String next

You are echoing the same line of thinking that led me to formulate my `pipes` library. I was trying to figure out how to use the same abstraction for both building the DSL and consuming the DSL. The result was to use a free monad to produce events (i.e. a Producer) and a free monad to consume events (i.e. a Consumer) and both were special cases of a Pipe.

DeleteHowever, there is some loss of power as a result, so take this answer with a grain of salt.

Fantastic article. I appreciate your "historic" approach mimicking a incremental line of reasoning . That is how people learn and the knowledge can be transmitted, by example and incrementally, not by enumeration of mathematical results. The latter is good to store knowledge, not to transmit it. The process of discovery must be reconstructed in each one's mind to fully gasp the meaning. Why force people to rediscover the path if the author know it and can transmit it? Maybe one day transmission of knowledge can be formalized.

ReplyDeleteLess philosophical: I suppose that free monad interpreters is what Oleg and others use to modelize effects itsn't it?. Do you plan to explain effects that way if you didn't already?

Yes, I agree that seeing the fully formed solution is not as helpful as seeing the thought-process that led to it. It also helps motivate why the solution exists in the first place.

DeleteFree monad interpreters are definitely one approach to modeling effects, but this is not a subject I'm an expert on. The last time I checked, one of Conor McBride's students, Stevan Andjelkovic was working seriously on taking this to its logical conclusion but I haven't followed up on that. There are lots of subtle details.

It's named Fix because it is "the fixed point of a functor".

ReplyDeleteI'd never heard the term "fixed point of a functor" before this article, FYI. I'm off googling it now, but you might want to explain that here.

(Update after a few minutes with google: the articles you get when you google "fixed point of a functor" are pretty beginner-hostile.)

The best resource I have read for fixed points of functors is this one:

Deletehttp://homepages.inf.ed.ac.uk/wadler/papers/free-rectypes/free-rectypes.txt

However, even that is a bit dense. I am slowly working on writing up an explanation of my own.

Hi Gabriel,

ReplyDeleteRegarding:

ringBell :: IO () -- some obnoxious library would provide this

Here is a working implementation (at least on OS X) based on a not so obnoxious library ;)

ringBell = putStr "\a"

Thanks for this enlightening article!

Daniel

Hi Gabriel,

ReplyDeleteI cannot figure out what you mean with sort of "Game" monad. The only thing I was able to do was:

type Game = IO

but I would like to have a way to define the functions "collectImage", "sendBullet", etc ... in a type class and then provide the instance with the implementation.

Could you make a short example?

Thanks for the beautiful article!

Matteo

So usually `Game` is almost always `IO`. I was just playing it safe by leaving it unspecified.

DeleteHowever, note that you don't gain much by translating the free monad to some type classed monad (i.e. some `MonadGame` type class). The reason why is that the type class encodes the same amount of semantic information as the original free monad: none at all. Actually, the type class is a little less powerful because now you no longer have access to the syntax tree any longer once you translate it to the type class and you can't perform manipulations on the syntax tree.

Most of the time you don't really need to manipulate the syntax tree anyway, so it's not a huge loss, but there are some cases where it does come in handy. An example of a library that heavily takes advantage of syntax tree manipulation is my `pipes` library, where all `pipes` are basically syntax trees of `Request`/`Respond` commands, and when you compose two pipes together it is fusing the two syntax trees together into a new syntax tree.

This comment has been removed by the author.

ReplyDeleteGabriel, thanks for the great text; but in the beginning of it you call the argument of Fix (and of Cheat) a functor. It is not obvious at all why it is a functor. Later you explain that you need fmap; that's ok, but that's confusing.

ReplyDeleteGreat post! Thank you!

ReplyDeleteYou're welcome! :)

Delete